=Paper=
{{Paper
|id=Vol-1849/paper9
|storemode=property
|title=None
|pdfUrl=https://ceur-ws.org/Vol-1849/paper9.pdf
|volume=Vol-1849
}}
==None==
<pdf width="1500px">https://ceur-ws.org/Vol-1849/paper9.pdf</pdf>
<pre>
                                             Journées portes ouvertes sur la Faculté des Sciences Exactes JFSE 2017



 Experimental Characterization of photovoltaic
                  modules
                                     Hicham HALILOU, Abdelkader NOURI,
                                             Department of Exact Science,
                                             University of Tahri Mohamed,
                                                   Béchar, Algeria,
                                                  hichi1994@live.fr

Abstract—Photovoltaic solar energy is one of the most used renewable energies, using a solar cell we can convert the
solar radiation into electricity, Research is being done to boost their output. It is impossible to understand innovations in
science without the aid of characterizations and measures. Measurements are necessary for R&D, production and thus
for the functioning of the physical principles of the PV cell up to the PV module in operation. Indeed, characterizations of
cells and panels in the laboratory under so-called standard test conditions (STC or NOCT) are important for comparing
cells or modules with one another but do not reflect their functioning under other real conditions. The objective of this
study is to characterize the PV module ET-M53685 in real conditions of use, and to see the most influential external
factors, on the behavior of the PV module. The first part is to measure the characteristics I (V), P (V) of two modules, and
the characterization of the site. The second part consists of determining these factors such as the voltage, current, power
and efficiency as a function of temperature. To determine the tolerance and reproducibility factor of the characteristics
compared to those of the manufacturer while trying to simulate the same measurement conditions as during manufacture
(STC, NOCT), and the factor of degradation of the modules as a function of time.

    Keywords— Photovoltaic, Renewable Energy, Solar Cell, Characterization




                                                             51

</pre>