The article presents a comparative analysis of existing methods of building wireless communication networks implementing the concept of "Internet of Things". A new method for reducing the power consumption of sensor nodes is proposed, which consists in the fragmentation of the wireless sensor network followed by the logical combination of separate local wireless networks. In the proposed method, it is possible to operate sensor units with battery power in a mode of reduced power consumption with the possibility of transmitting and retransmitting messages at any time.
In recent years, important tasks related to monitoring of territorially distributed objects and their
management can be combined within the framework of the "Internet of Things" (IoT) concept. The
relevance of this direction for our country can be confirmed, for example, by the studies of the IDC
consulting company, which shows that by 2021 the costs of the Internet of things in Russia will exceed
9 billion dollars. Among these tasks, a special place is occupied by tasks related to the implementation
of monitoring and management of various territorially distributed objects. In this case, it is necessary,
firstly, to monitor in real time that the specified key parameters of the environment or the object itself
(for example, temperature, humidity, unauthorized access, etc.) are within the specified limits, and
secondly, to carry out storage and analysis of these key parameters, and thirdly, to signal to
responsible employees about certain critical situations. Features of such tasks are also the need to
transmit relatively large amounts of data (for example, individual photographs of the territory or sound
file), the availability of requirements for autonomous operation even in the absence of connection to
the control loop, the need to control the actuators (camera drives, climate devices). There are a lot of
different technical means that can individually solve these problems. However, the vast majority of
them require the presence of wired communication channels. The organization of these channels, for
example, for apartment buildings, large enterprises, museums, large warehouses or protected areas of
considerable size, is extremely difficult. Therefore, to solve these problems the use of
radioinfrastructure created within the framework of self-organizing data transmission networks utilization is
considered to be rational [
There is a large number of technologies that can individually solve the above-mentioned tasks. However, a vast majority of them require the presence of wired communication channels or the use of a radio network of data transmission containing a distributed network of base stations. In this paper, we propose an alternative approach related to the use of high-speed sensor networks. At the same time, it should be noted that, despite the considerable interest in this subject in recent years, there are very few technologies available to implement wireless network interaction of a large number of elements, and all of them, as will be shown below, have significant drawbacks from our point of view. In connection with what has been said, we believe that the task formulated earlier, the solution of which is directed at research, is topical.
Consider the existing technologies, which are currently used to solve the problems of network
interaction of various devices.
3.1.1. GSM /GPRS technology. The technology, based on packet data transmission over cellular
channels, assumes the use of the corresponding GSM/GPRS modems (3G, 4G, etc.) according to the
principle of operation is similar to the Internet [
Specifications Swift Lora SigFox NB IoT WiFi up to 100 m. 2.4 G Hz 0.2-200 Mb/s 1 month Yes No Yes Yes no At the applicati on layer no
GSM/3G /LTE up to 12 km. 2. 4 GHz 9.6 kB/s 19.2 MB/s 1 month Yes no Yes Yes no At the application layer no up to 10 km. * 868 MHz 50 bps up to 10 km.* 868 MHz 10-1000 b/s up to 6 km. * 900 MHz 1-20 kB/s Range
up to 12 km. * Frequency 433, 868 MHz Data transfer 0.1 - 50 kB/s rate (UpLink ) Autonomy 8 years ** 6 years ** 10 years ** Upgrade by air Yes Yes no Ability to transfer data no no no Practical ability to no yes (for C no transfer data to class devices ) modules (DownLink ) Possibility of transfer no no no of media information The ability to no no no no dynamically separate data packets to ensure maximum data transfer speed The ability to protect no no no no the transmitted information The ability to program no no no no scenarios for advanced network segment management * Data from open sources. In urban conditions, the range is significantly reduced ** Based on a single survey module per day and emergency wake up every two days 4 years ** Yes no Limited by network capabilities no
The data presented in the table show that existing solutions do not fully solve the problem of information transfer and interactive interaction with each other especially in conditions of limited energy consumption.
The presented brief analysis makes it possible to understand that, despite the various IoT technologies present already in the coming years, there remain a number of problems, the solution of which is impossible using only these technologies. Among these tasks, one can single out the task of transferring relatively large (up to several megabytes) volumes of information through a selforganizing dynamic sensor network, which includes elements using only autonomous power. This task occurs for example when transmitting information control blocks, images, voice fragments, small video files between geographically distributed sensors and actuators. The use of only existing technologies, including those listed above, involves creation of a specialized infrastructure and requires significant installation and operating costs. Therefore, there are various ways to build wireless networks with reduced power consumption. Let us consider these most characteristic ways.
Selective inclusion of field devices in a low-voltage wireless mesh network. The method [
1) a relatively long period of the wireless device’s on-time stay, which is caused by the need to wait for the awakening information signal;
2) the wake-up information signal at a particular time can only transmit one wireless communication device, since the simultaneous operation of the two wireless communication devices will result in the loss of transmitted information and the impossibility of detecting the fact of wake-up;
3) a wireless battery-powered device cannot wake up other wireless devices with battery
power, which greatly limits the capabilities of the wireless network.
3.2.3. A method for tracking and communicating mobile terminals using a wireless network
infrastructure with autonomous power. Method [
In order to avoid the drawbacks of these methods of reducing power consumption and to enable the transmission of large information packets in real time, we propose that one describes the operation of sensory nodes in a wireless network as a change in the various states associated with performing various functions and with different power requirements from the battery pack. Such states can include the following steps: a), which transfers the transmitter and receiver of the sensor node to a power-off state, in order to minimize power consumption; b), which includes powering the sensor node receiver during a limited scan time interval to detect a beacon, and when detected, an output from the minimum power state is performed, the contents of the beacon being neither received nor processed by the receiver, since only the radio signal is detected on a given frequency channel with a quality higher than a predetermined one, which allows the sensor node to work in the case of simultaneous transmission of a beacon by several other sensory nodes. In addition, the time interval for scanning here is sufficiently small, since the actual reception of the message is not performed; c), which includes the power supply of the transmitter of the sensor node during a limited time interval for transmitting the beacon Tm to act on adjacent sensory nodes and temporarily transferring them from the minimum energy consumption state to the active working state, the awakening state. A beacon is a message that lasts for Tm, with unprincipled content, because the effect is achieved by its continuous transmission; d), which includes powering the sensor node receiver, powering the sensor node transmitter for a limited transmission time interval or relaying the message to/from the central server, which is actually the awakening state in which the sensor node interacts.
It should be noted that steps a) and b) are repeated intermittently with a period T that is less than the limited time interval of the Tm beacon transmission, which allows the sensory nodes to confidently detect the beacon. In most cases, the purpose of sensory networks is the transmission of information about the physical impact on the central server and the transfer of target designations from the central server to the sensory node, in some cases, involve the interaction of some sensory nodes with each other. Proceeding from the foregoing, in the proposed method, a wireless sensor network is logically divided into k functionally separate wireless sensor local networks that operate on their own local frequency channel in steps a) -c) and use the procedure for relaying messages within the wireless sensor local area network. To provide information exchange between the wireless sensor local area networks and the central server, n wireless repeaters are additionally introduced, with one or more wireless sensor LANs being assigned to one wireless repeater. All wireless repeaters operate on the frequency channel of retransmission, use the mode of acknowledgment of receipt of the message with the possibility of retransmission, use the permanently switched on power of the receiver and transmitter, which allows providing guaranteed information delivery. The first wireless repeater is connected to the central server using standard interfaces (for example, a virtual com-port over the USB interface). An exemplary network topology is shown in Figure 1. When a message is sent from the central server to a given sensor node of the specified wireless sensor local area network, the address of the sensor node, the local frequency channel number, and the number of the wireless sensor local area network are included in the message. The message is then transmitted to the first wireless repeater and using the relay process, the message through the wireless repeaters transmits it to the wireless repeater behind which the wireless sensor local area network indicated in the message is attached. After these operations, this wireless repeater changes the frequency channel of the relay to the local frequency channel of the wireless sensor local network indicated in the message, sends the beacon to the original frequency channel of the relay for a limited time interval of the beacon transmission. In this case, those sensor nodes that detect the beacon are switched to the composite awakening step e), at which the transition to step c) is performed, the beacon is transmitted, switched to step d), the local frequency channel is changed to a frequency relay channel and at a random time interval, times the transmission time of the label, send a label. A delay in the transmission of a label to a random time interval is necessary for a time-separated transmission process by several sensor nodes that simultaneously detected a beacon. The label includes the address of the sensor node and the number of the wireless sensor LAN. Further, other sensor nodes of the wireless sensor LAN that detect the beacon from the previous sensor nodes are switched to the composite awakening step e). Thus, all sensor nodes of the wireless sensor LAN are sequentially switched to the composite wake-up stage e). In this case, the sensor nodes of the wireless sensor local network relay the labels and when the wireless repeater receives a label in which the address of the sensor node coincides with the address of the message, the wireless repeater sends the message to the wireless sensor local network specified in the message. The response message from the sensor node through the wireless repeaters is relayed to the central server, from which it then performs a dialogue with the specified wireless sensor local area network and/or sends a message of the end of the communication session, after receiving which all sensor nodes are transferred to repetitive steps a) and b) and restore the local frequency channel. Thus, the sensor nodes are forced into a state of reduced power consumption. In case when sensors of the sensor node of the wireless sensor LAN detect physical interference, the sensor node is switched to the composite wakeup stage e). Then, other sensor nodes of the wireless sensor LAN that detect the beacon from the previous sensor nodes are switched to the compound awakening step e). As a result, all sensor nodes are sequentially switched to the compound awakening stage e). When a wireless repeater receives any label, a permission is sent from it to the wireless sensor LAN. Thereafter, a sensor node sends a physical impact message to the sensor node and/or central server indicated in the physical impact message. When a specified sensor node receives a physical impact message, it performs the instructions contained in the physical impact message. When the central server receives a physical impact message, it performs a dialogue with this sensor node and/or sends a session end message, after which all sensor nodes are transferred to repetitive steps a) and b) and restore the local frequency channel. Thus, the sensor nodes are forcibly returned to the state of reduced power consumption. It should be noted that the sensor nodes themselves go into a state of reduced power consumption if they do not receive any messages during the limited time interval of operation in step e). Figure 2 shows the main signals and their sequence. Since, when transmitting a beacon, wireless repeaters temporarily change the frequency channel of retransmission to the local frequency channel of the wireless sensor local network for a short time Tm, then messages transmitted by wireless repeaters in the retransmission mode on the frequency relay channel may be lost. To exclude the loss of messages by wireless repeaters, the acknowledgment mode of receiving a message with the possibility of retransmission is used. It should be noted that before transmitting messages by wireless repeaters or before sending labels and other messages by sensor nodes, they all listen for the frequency channel of retransmission and, if it is free, transmit. Moreover, the sensor nodes of a given wireless sensor local network retransmit only those messages whose wireless sensor network number coincides with their own number. In addition, wireless repeaters use a message buffering procedure while simultaneously serving more than one wireless sensor LAN, thereby eliminating the loss of packets.
The proposed solution can be implemented in the technological process "the smart house" in an apartment house. For this: Each wireless repeater and sensor node is assigned a unique address and a number of technological parameters (frequency channel, transmitter power, modulation type, maximum length of the transmitted message, etc.) specific to the hardware implementation of these devices; Place the wireless repeaters on the staircases of each floor of the building; In designated or in all apartments locate sensor nodes that within the boundaries of a separate apartment form a wireless sensor local area network; In the attic or in the basement there is a central server with the ability to access the global Internet (if necessary).