=Paper=
{{Paper
|id=Vol-2298/paper8
|storemode=property
|title=Development of Methods and Software for Automated Preparation of Maps of Urban-Planning Regulation of the Territory of Municipalities
|pdfUrl=https://ceur-ws.org/Vol-2298/paper8.pdf
|volume=Vol-2298
|authors=Denis Shiriaev,Oleg Blokhin,Anton Rychkov
}}
==Development of Methods and Software for Automated Preparation of Maps of Urban-Planning Regulation of the Territory of Municipalities==
https://ceur-ws.org/Vol-2298/paper8.pdf
Development of Methods and Software for Automated Preparation
of Maps of Urban-Planning Regulation of the Territory of
Municipalities
Denis Shiriaev Oleg Blokhin Anton Rychkov
Ural Federal University Union of urban planners Ural Federal University
Ekaterinburg, Russia “Gradunion” Ekaterinburg, Russia
denis.shiriaev@urfu.ru Ekaterinburg, Russia ar@gradunion.ru
Abstract
Traditionally, maps of urban planning regulation are created by operators-
cartographers with the help of instrumental GIS. The developed methodology and
software allow to automate the preparation of maps of urban-planning regulation of the
territory of municipalities.
1 Introduction
The urban development regulation is the activity regulation on territories-development, including cities and other
population centers that is carried out in accordance with the Urban development Code of the Russian Federation by the
authorities with citizens in the form of: 1. general spatial planning; 2. Land Zoning; 3. detailed / draft land planning; 4.
architectural and construction design; 5. construction activities, major repairs, reconstruction of capital construction
objects.
Accompanying element is the institution of land parcels affordance for the construction and reconstruction of capital
construction objects. The system of urban development regulation (the system of the legal urban development regulation)
is the legally organized set of organized structures that make efforts to create a legal basis and information conditions for
urban development activities and to control the urban development activities. The regulation is conducted on behalf of the
authorities in accordance with the established procedures. This regulation is carried out by the authorities (territorial
planning, Land Zoning, detailed / draft land planning, architectural and construction design and construction activities -
for facilities which can be created by the authorities) and the real estate developers (both architectural and construction
design as well as construction activities) [1].
The urban development regulation can be carried out in the presence of the three components: 1. ordered set of public
subjects of the urban development regulation; 2. procedures organized under the laws of the urban development
regulation; 3. ordered set of differentiated actions -urban development regulating tools [2].
Traditionally, maps of urban planning regulation are created by operators-cartographers with the help of instrumental
GIS, which requires significant labor resources, amounts to 70% of the cost of developing maps. In addition, there are
errors due to the human factor. The developed methodology and software allow to automate the preparation of maps of
urban-planning regulation of the territory of municipalities [3].
2 Urban planning maps
The following basic elements (components) are created (defined) in the composition of urban planning maps [4]:
Functional zones are zones for which boundaries and functional purposes are defined by the documents of territorial
planning.
Urban-planning zoning - zoning of territories of municipal formations with a view of definition of territorial zones
and an establishment of urban-planning regulations.
Territorial zones are zones for which boundaries and urban planning regulations have been defined in the rules of land
use and development.
The rules of land use and development are a document of urban planning zoning, which is approved by the regulatory
legal acts of local self-government bodies and in which territorial zones, urban planning regulations, the procedure for
applying such a document and the procedure for making changes to it are established.
The preparation of the territorial planning projects is carried out to identify the elements of the planning structure,
establish the boundaries of common areas, the boundaries of the zones of planned placement of capital construction
facilities, determine the characteristics and order of the planned development of the territory.
Red lines are lines that denote existing, planned, modifiable boundaries of common areas or boundaries of territories
occupied by linear objects or intended for placing linear objects.
Territories of common use are territories that are unhindered by an unlimited number of persons (including squares,
streets, driveways, embankments, coastal stripes of public water bodies, squares, boulevards).
Element of the planning structure is a part of the territory of the settlement, city district or inter-settlement territory of
the municipal district (quarter, microdistrict, planning district and other similar elements) [5].
3 The process of automated preparation of urban planning maps
The procedures are performed in a spatial data base containing orthophotoplane, state real estate cadastre data.
Figure 1: Orthophotoplane
Figure 2: Real estate cadastre data
3.1 Stages of the process of automated preparation of urban planning maps
1. Manual allocation of contours of built-up area on an orthophotoplane.
Figure 3: Manual allocation of contours of built-up area
2. Manual allocation of axes (middle lines) of streets without presentation of requirements to accuracy. At the same
time, there is an automatic formation of public areas in the form of a buffer from the axis, with a size that meets the
requirements of technical standards.
3.2 Automatic stages
Further on the basis of spatial data, scripts are run using the optimization genetic algorithm. With their help it is
produced:
3. Automatic centering of the street axes relative to the contours of the built-up area.
Figure 4: Automatic centering of the street axes
4. Automatic correction of the boundaries of public areas to meet the requirement of non-intersection with the
contours of built-up areas, but at an equal distance from the axis of the street throughout its entire length.
Figure 5: Automatic correction of the boundaries of public areas
Thus, quarters are obtained - elements of the planning structure and red lines, which together make up the project of
planning the common use territory of the settlement.
Figure 6: Project of planning the common use territory
3.3 Preparation of the map of urban zoning
5. To form territorial zones, blocks of land plots that are beyond their boundaries are automatically added to quarters
with specified boundaries (corresponding to cadastral requirements).
6. Automatically determines the type of the territorial zone in accordance with the main types of permitted use of land
and functional areas of the master plan.
Figure 7: Preparation of the map of urban zoning
7. Automatically generated electronic documents in the xml format for state cadastral registration of territorial zones.
4 Сonclusion
In the course of the work, a methodology and software was developed that made it possible to automate the preparation
of maps of urban-planning regulation of the territory of municipalities. Thanks to this, the need for labor resources is
noticeably reduced, the cost of card development can also drop noticeably. In addition, the number of errors caused by
the human factor is reduced.
Acknowledgements
Denis Shiriaev acknowledgements scientific advisors Nikolay Khlebnikov and Ilya Obabkov. Authors
acknowledgements the team of Union of urban planners “Gradunion”.
References
1. The Institute for Urban Economics. Town planning: The fundamentals of urban planning regulation in the
conditions of the real estate market. The Institute for Urban Economics, 2008.
2. D. Shiriaev, A. Rychkov, D. Kiselev and A. Trusov. The tasks and problems of building a geoinformation
system of urban development regulation at the municipal level. Geodesy and cartography, Special Issue
2:39{42, 2015.
3. L. Zivkovic and A. Dordevic. Building a GIS Platform for Sustainable Land Management: A Case Study of
the City of Cacak, Serbia. J. of Urban Technol., 4:29{46, 2016.
4. Springer Handbook of Geographic Information { F. Wilke / Planning. Springer, 2012.
5. The Russian Federation. Urban development Code of the Russian Federation: approved by the Russian
Federation dated 29 December 2004, No. 190. The Russian Government, 2018.