=Paper=
{{Paper
|id=None
|storemode=property
|title=Demonstration: A RESTful SOS Proxy for Linked Sensor Data
|pdfUrl=https://ceur-ws.org/Vol-839/broering.pdf
|volume=Vol-839
|dblpUrl=https://dblp.org/rec/conf/semweb/BroeringJSSEL11
}}
==Demonstration: A RESTful SOS Proxy for Linked Sensor Data==
https://ceur-ws.org/Vol-839/broering.pdf
Demonstration: A RESTful SOS Proxy for Linked
Sensor Data?
Arne Bröring1 , Krzysztof Janowicz2 , Christoph Stasch3 , Sven Schade4 , Thomas
Everding3 , and Alejandro Llaves3
1
52◦ North Initiative for Geospatial Open Source Software GmbH, Germany
2
University of California, Santa Barbara, USA
3
Institute for Geoinformatics, University of Münster, Germany
4
Institute for Environment and Sustainability, Joint Research Centre, Ispra, Italy
Abstract. Next generations of spatial information infrastructures call for more
dynamic service composition, more sources of information, as well as stronger
capabilities for their integration. Sensor networks have been identified as a ma-
jor data provider for such infrastructures, while Semantic Web technologies have
demonstrated their integration capabilities. Most sensor data is stored and ac-
cessed using the Observations & Measurements (O&M) standard of the Open
Geospatial Consortium (OGC) as data model. However, with the advent of the
Semantic Sensor Web, work on an ontological model gained importance within
Sensor Web Enablement (SWE). The ongoing paradigm shift to Linked Sensor
Data complements this attempt and also adds interlinking as a new challenge. In
this demonstration paper, we briefly present a Linked Data model and a RESTful
proxy for OGC’s Sensor Observation Service (SOS) to improve integration and
inter-linkage of observation data.
Keywords: Semantic Sensor Web, Linked Sensor Data, REST, Sensor Observation
Service
1 Introduction
The Sensor Web requires well defined semantics to make observation data discoverable
and reusable [2]. The Semantic Web provides the necessary framework by (i) formal and
machine-readable ontologies for sensors, observations, and observed properties, and by
(ii) using reasoning to discover implicit facts, relations, and contradictions. So far, the
Sensor Web and Semantic Web are not well connected which limits data exchange as
well as combining their services. To address this problem, we have proposed and par-
tially implemented a Semantic Enablement Layer for Spatial Data Infrastructures (SDI)
[3]. It encapsulates Semantic Web reasoners and ontology repositories within OGC
Web services to enable a transparent and seamless integration of Semantic Web tech-
nologies with SDIs. This work focuses on enabling the reverse direction, i.e., making
spatial information available on the Semantic Web without changing existing standards
and implementations. To facilitate integration and inter-linkage of observation data, this
?
This demonstration paper is a modified excerpt of the article by Janowicz et al. 2011 [1]
demonstration paper presents a Linked Data model and a RESTful proxy for the Sensor
Observation Service (SOS) interface of OGC’s Sensor Web Enablement initiative [4].
For two related approaches on serving semantic-enabled sensor data see [7,8].
2 System Architecture
The RESTful SOS proxy is available as free and open source software5 . It can be in-
stalled as a software facade in front of any OGC conform SOS and offers the core
functionality to make sensor data available as Linked Data. Based on a well-defined
URI scheme [1], the RESTful proxy extracts the user’s query from the URI, encodes it
into valid SOS queries, fetches the results from the underlying SOS, and converts them
(after content negotiation) to RDF/XML aligned with the developed model for Linked
Sensor Data (Figure 2). Consequently, each URI identifies a particular data set and at
the same time encodes a query to the underlying SOS.
The RESTful SOS proxy is implemented using the OX-Framework [5], a software
framework which facilitates the utilization of OGC Web Services, such as the SOS.
The OX-Framework handles access of various service interfaces by providing a generic
architecture that includes a plug-in mechanism for service adapters as extension points
of the framework.
Fig. 1. Resolving a URI by the RESTful SOS proxy [1]
Three kinds of service adapters are needed for accessing a service (Figure 1):
Service connectors trigger service operations and instantiate the common capabilities
model. Feature stores provide the functionality to unmarshal received feature data into
the internal feature model of the OX-Framework, while data processors run on the
instantiated feature model and transform the feature data into other representations.
We developed a data processor that converts observations into RDF-encoded Linked
Data; however, we also support other representations such as KML or JPEG charts. The
5
http://52north.org/RESTful_SOS
RESTful SOS proxy chooses the right data processor based on HTTP content negotia-
tion.
3 Demonstration
The proxy exposes sensor data following a particular URI scheme. While OGC’s Obser-
vations & Measurements standard supports unique identifiers, it currently does neither
prescribe the use of HTTP URI’s, the persistence of identifiers, nor clear and flexible
linking strategies between resources. Ontologies abstract from data models and aim at
describing the physical world. For example, they specify the notion of a stimulus which
triggers a sensor and leads to the observation. The stimulus as such, however, is out of
scope for O&M. Therefore, we introduce an intermediate Linked Data model by ex-
tending the W3C SSN ontology’s Stimulus-Sensor-Observation (SSO) ontology design
pattern [6]; see Figure 2. The relations between the presented classes act as links in our
model and define the multiple navigation paths and external references.
Fig. 2. Concept map with the classes and relations of the Linked Sensor Data model [1].
In the demonstration, we present how URIs act as identifiers for sensor data
and as query filters which are mapped by the RESTful proxy to SOS GetOb-
servation requests. For instance, the URI http://v-swe.uni-muenster.de:
8080/52nRESTfulSOS/RESTful/sos/AirBase_SOS/observations/sensors/
HR:0002A/samplingtimes/2008-01-01,2008-12-31/observedproperties/
concentration[NO2] points to the observation collection with all NO2 observations
from a specific sensor during 2008.As the proposed solution offers the sensor data as
a RESTful service, we will apply a common web browser to illustrate how queries are
constructed and how users may interact with the service front-end.
4 Conclusion
In this demonstration paper, we report on the implementation of a transparent and
RESTful SOS proxy that can serve Linked Sensor Data without any modifications to
existing OGC services and existing SDI deployments. We decided to use a RESTful ap-
proach as it combines three key advantages. First, URIs are building blocks of Linked
Data. REST allows us to identify data and at the same time encode the query using our
URI scheme. Second, a major requirement of our vision of Semantic Enablement [3] is
transparency, which is given by our REST proxy approach. Third, the REST paradigm
focuses on simplicity with respect to application implementation.
Summing up, the proposed approach provides an important step towards the seman-
tic enablement of existing information systems and infrastructures, and thereby eases
the integration of dynamic information sources such as sensor networks. Delivering
observations as Linked Data, connecting them with other data sources, and using on-
tologies and Semantic Web reasoners to improve retrieval, alignment, and matching are
major building blocks for the implementation of novel information infrastructures.
Acknowledgments
The presented work is developed within the 52◦ North semantics community (http://
52north.org/semantics), and is partly funded by the European projects EO2Heaven
(FP7-244100) and ENVIROFI (FP7-284898).
References
1. Janowicz, K., Bröring, A., Stasch, C., Schade, S., Everding, T., Llaves, A.: A restful proxy
and data model for linked sensor data. International Journal of Digital Earth (2011; in press)
2. van Zyl, T., Simonis, I., McFerren, G.: The sensor web: systems of sensor systems. Interna-
tional Journal of Digital Earth 2 (1) (2009) 16–30
3. Janowicz, K., Schade, S., Bröring, A., Keßler, C., Maue, P., Stasch, C.: Semantic enablement
for spatial data infrastructures. Transactions in GIS 14(2) (2010) 111–129
4. Bröring, A., Echterhoff, J., Jirka, S., Simonis, I., Everding, T., Stasch, C., Liang, S., Lemmens,
R.: New Generation Sensor Web Enablement. Sensors 11(3) (2011) 2652–2699
5. Page, K., De Roure, D., Martinez, K., Sadler, J., Kit, O.: Linked sensor data: Restfully serving
rdf and gml. In K., T., Ayyagari, A., De Roure, D., eds.: Proceedings of the 2nd International
Workshop on Semantic Sensor Networks (SSN09). Volume Vol-522., CEUR (2009) 49–63
6. Henson, C.A., Pschorr, J.K., Sheth, A.P., Thirunarayan, K.: Semsos: Semantic sensor observa-
tion service. In: International Symposium on Collaborative Technologies and Systems (CTS
2009), Baltimore, MD, USA, IEEE (May 2009)
7. Bröring, A., Jürrens, E.H., Jirka, S., Stasch, C.: Development of Sensor Web Applications
with Open Source Software. In: First Open Source GIS UK Conference (OSGIS 2009), 22
June 2009, Nottingham, UK. (2009)
8. Janowicz, K., Compton, M.: The stimulus-sensor-observation ontology design pattern and its
integration into the semantic sensor network ontology. In Ayyagari, A., Roure, D.D., Taylor,
K., eds.: Proceedings of the 3rd International workshop on Semantic Sensor Networks 2010
(SSN10) in conjunction with the 9th International Semantic Web Conference (ISWC 2010).
Volume 668., CEUR-WS (2010)